Fly lines are expensive and there's more than one reason a little cleaning, care and maintenance will pay dividends. As you'll see in a moment there are a couple of very good reasons to regularly clean your fly lines - and keep them clean.
Fly lines pick up and hold a film of dirt, grime and salt. With floating fly lines this layer of dirt reduces the lines ability to float, it also severely increases friction through the guides and reduces your ability to shoot line. Dirty fly lines tend to degrade and crack much sooner than fly lines that are cleaned and dressed regularly. A clean, slick line will make a world of difference to your casting.
A dirty fly line is effectively a string coated in grinding paste, every time that line runs through your guides it is grinding away at your rod guides - and if you are a habitual hauler like me, that's thousands of cycles a season.
Most modern fly lines are internally lubricated - that is, the lubrication is actually present within the line and weeps out over time. In days gone by, the slickness was added externally after the fly line was extruded - the slick coating wearing off quite quickly.
Although fly lines may not be cheap, they are far less expensive than a new fly rod, and that's what you'll be up for if you do a lot of casting with a dirty fly line. If you're a keen caster and do a lot of practicing on grass you'll find that guides wear and groove very quickly - this tends to be because grass is covered with a fine layer of dirt and silt that makes a very good grinding paste. If you are out practising your casting be sure to clean your line after every session.
The pictures below show one of our rods that has done quite a few miles with a dirty line. These are not cheap guides either, we use top quality Snake Brand Guides, and independent fog and wear tests show that they are the best in the industry for wear and durability - however, you can clearly see the pot marks and grooves ground into the tip top and guides. Note also the scratches across the epoxy wraps - these scratches are created by a dirty line sawing across the blank.
We love seeing our rods do the hard yards - that's exactly what they are designed for, but even one of our Epics will eventually show signs of wear in this situation.
A badly grooved tip top. It's done a few miles and is showing it.
Grooves clearly showing in a Snake Guide. You can also see scratches on the epoxy work.
It's actually a very simple procedure.
That's it - you've cleaned your fly line. Next step...
Now is the best time to dress the clean line. There are a bunch of commercially available line cleaners - use as directed. Armor All car cleaner isn't recommended. Yes, it does a great job of making your line super slick - but there are other chemicals in the mixture that will actually shorten the life of your line. Most manufacturers use silicon to lubricate their lines - so a 100% silicon product should also do the trick nicely.
Scientific Anglers make a great product that includes a good cleaning pad - here's the lowdown.
Comments will be approved before showing up.
The use of Graphene nano resin affords clear performance advantages. 5% Lighter, tougher and more responsive.
Our SnakeBelly™ Satin finish is scratch and chip resistant making for an extremely tough and durable fly rod that is less prone to stress fractures caused by collisions with weighted flies.
Giving the Epic 590 a workout on Zorro Spring Creek in the Chilean Andes last January. I was consistently amazed at the way that rod performed in a variety of circumstances. I mentioned utility in my Instagram post and I meant it. The 590 Fly Rod basically ticks all the boxes for me as a trout rod. You guys ruined me.